Fricke

                   Fricke Electric E-Spinner       $657.00

              The Fricke E-Spinner is designed for production minded spinners, or those unable

              to use a treadle wheel for extended periods. Features ease of a delta orifice as standard;

              optional 3/8" round orifice and threading hook available for an additional $15. Kate and

              4 bobbins included. This scotch tension spinner can be used to spin in either Z or S twist.

              The quiet reversible US-made motor runs the flyer at up to 1500 r.p.m. Base and

               optional cover are made of luscious cherry wood sealed with tung oil and a clear protective

               topcoat. Cover makes a compact and attractive carrying case and protective storage unit.  71.50

              Another smooth operating wheel, this double treadle version of our popular S-160 is twice

              as easy to use. Use half the effort and get twice the power of most single treadle wheels.

              Easy delta orifice is standard; optional 3/8" round orifice with threading hook an additional

             $15. The frame is made of various hardwoods, such as ash, white or red oak. Wheel is MDF

             with attractive wood grain finish on both sides. Includes 4 bobbins and a Kate.

             Fricke S-160 5 speed - Scotch Tension Spinning Wheel  $272.00
            The best kept secret in spinning wheels, this 17" wheel has sealed ball bearings for smooth

             treadling. Flyer drive features the ease of a delta orifice. Optional 3/8" round orifice and

             threading hook an additional $15. Ratios: 5.7:1, 6.8:1, 8.7:1, 12:1, 19.4:1. Frame is various

            hardwoods, such as ash, white or red oak. Wheel is MDF with an attractive wood grain finish on

            both sides. Heel-toe action with large, wide treadle, includes 4 bobbins and a Kate.

             Fricke 2-Yard Skein Winders with Flip-Style Counter:   Floor Model $142.00

                                                                                                                                                            Clamp-On Model $131.00

             Floor Model & Clamp-On Model floor model is similar in height to most wheels. Hub is 30"

             from the floor. With one arm perpendicular to floor, the highest point of the arm is 43" from

             floor. Clamp-on model clamps to a table, chair, workbench, etc. Hub is 17.5" from its base.

             With one arm perpendicular to base, the highest point of the arm is 30.5" from base. Made of

             ash and other hardwoods. Our Hinged Flip-Style Counter is installed on all of our skein winders.

            Two counts per revoultion; exact yardage amount registers on counter. The hinged counter allows

             you to use it or not. If you need to operate the Winder counter-clockwise, the counter can be

             flipped out of the way so the mechanism is not subjected to damage.